收藏本站
A Product Line of
Diodes Incorporated
ZXLD1356/ ZXLD1356Q
Application Information (cont.)
V IN Capacitor Selection
A low ESR capacitor should be used for input decoupling, as the ESR of this capacitor appears in series with the supply source impedance and
lowers overall efficiency. This capacitor has to supply the relatively high peak current to the coil and smooth the current ripple on the input
supply.
To avoid transients into the IC, the size of the input capacitor will depend on the V IN voltage:
V IN = 6 to 40V
V IN = 40 to 50V
V IN = 50 to 60V
C IN = 2.2μF
C IN = 4.7μF
C IN = 10μF
When the input voltage is close to the output voltage the input current increases which puts more demand on the input capacitor. The minimum
value of 2.2μF may need to be increased to 4.7μF; higher values will improve performance at lower input voltages, especially when the source
impedance is high. The input capacitor should be placed as close as possible to the IC.
For maximum stability over temperature and voltage, capacitors with X7R, X5R, or better dielectric is recommended. Capacitors with Y5V
dielectric are not suitable for decoupling in this application and should NOT be used.
When higher voltages are with C IN = 10μF, an electrolytic capacitor can be used provided that a suitable 1mF ceramic capacitor is also used and
positioned as close to the V IN pin as possible.
A suitable capacitor would be NACEW100M1006.3x8TR13F (NIC Components).
The following web sites are useful when finding alternatives:
www.murata.com
www.niccomp.com
www.kemet.com
Inductor Selection
Recommended inductor values for the ZXLD1356 are in the range 68 μH to 220 μH.
Higher values of inductance are recommended at higher supply voltages in order to minimize errors due to switching delays, which result in
increased ripple and lower efficiency. Higher values of inductance also result in a smaller change in output current over the supply voltage range.
(see graphs pages 10-16). The inductor should be mounted as close to the device as possible with low resistance connections to the LX and V IN
pins.
The chosen coil should have a saturation current higher than the peak output current and a continuous current rating above the required mean
output current.
Suitable coils for use with the ZXLD1356 may be selected from the MSS range manufactured by Coilcraft, or the NPIS range manufactured by
NIC components. The following websites may be useful in finding suitable components.
www.coilcraft.com
www.niccomp.com
www.wuerth-elektronik.de
The inductor value should be chosen to maintain operating duty cycle and switch 'on'/'off' times within the specified limits over the supply voltage
and load current range.
Figures 3 and 4 (following) can be used to select a recommended inductor based on maintaining the ZXLD1356 case temperature below 60°C
for the different package types. For detailed performance characteristics for the inductor values 68, 100, 150 and 220μH see graphs on pages
10-16.
ZXLD1356/ ZXLD1356Q
Document number: DS33470 Rev. 4 - 2
22 of 29
www.diodes.com
October 2012
? Diodes Incorporated
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ZXLD1360ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD1362ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD1366DACTC IC LED DRIVER WHITE BCKLGT 6-DFN
ZXLD1370EST16TC IC LED DRVR HIGH BRIGHT TSSOP-16
ZXLD1371QESTTC IC LED DRIVER
ZXLD1374EST20TC IC LED DVR BUCK BOOST 20TSSOP
ZXLD1937ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD381FHTA IC LED DRIVR WHITE BCKLT SOT23-3
相关代理商/技术参数
ZXLD1356ET5TA 功能描述:LED照明驱动器 550mA, 60V LED Drver, Int Swtch RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXLD1356QET5TA 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 550mA LED DRIVER and AUTOMOTIVE GRADE
ZXLD1360 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:30V 1A LED DRIVER with AEC-Q100
ZXLD1360ET5TA 功能描述:LED照明驱动器 7-30V Input 1Amp w/Internal Switch RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXLD1360ET5TA-CUT TAPE 制造商:DIODES 功能描述:ZXLD1360 Series 1 A 1 MHz SMT LED Driver with Internal Switch - TSOT-23-5
ZXLD1362 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 1A LED DRIVER WITH AEC-Q100
ZXLD1362_12 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 1A LED DREIVER WITH AEC-Q100
ZXLD1362ET5TA 功能描述:LED照明驱动器 1A/60V LED DRIVER RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N